Installing fiber optic cables within homes and businesses requires fiber optic professionals to do more than just run the cables to wherever they need to go. Once they reach their destination, professionals also need to do fiber optic termination and splicing to place connectors on the ends of cables so they can be used. This fiber optic termination guide will explain more about how this process is carried out.
There are a handful of methods used to conduct fiber optic termination successfully. Pigtail splicing is one of the most common methods. It involves fusion splicing a factory-made assembly onto a fiber optic cable’s end. No polish connectors can also be used to do fiber optic termination. It’s a method that’s similar to pigtail splicing except it relies on a mechanical splice instead of fusion splicing. Heat-cured terminations and crimp terminations can also be utilized by fiber optic installers depending upon the situation.
When terminating fiber optic cables, it’s important for a fiber optic professional to start by selecting the right termination components to go along with the fiber optic cables being used. They will then run the fiber optic cables to their termination point without placing them under any unnecessary stress along the way. Once that’s done, they will install the termination connectors onto the end of the fiber optic cables without crushing any of the fibers in the cables. As long as this is all done properly, fiber optic termination will be complete.
This fiber optic termination guide provides the basics for how fiber optic termination is done. But it’s best to leave fiber optic termination jobs to the professionals. Connected Fiber can assist